Call Us:

(0086)18914337708
Products
Controllers & Indicators
Explosion-proof Indicator
Load Cell
Weighing Module
Bench Scales
Floor Scales
Intelligent Weighing System
Customized Solutions
Accessories
Products
SELECTED PRODUCT LINES:
ID511Pro , Panel
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output) In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID511Pro , DIN Rail
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output)
In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID511Pro , Harsh
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output) In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID511CKW
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
Scale x 1 4-20mA (16-bit precision DAC)
Scales x 2 4-20mA (16-bit precision DAC)
I/O (input/output options)
 In x 8 / OC Out x 12
 In x 8 / Relay Out x 12
Multiple calibration modes Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
ID511, Panel
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
4-20mA (16-bit precision DAC) x 1
4-20mA (16-bit precision DAC) x 2
I/O (input/output options)
 In x 8 / OC Out x 12
 In x 8 / Relay Out x 12
Multiple calibration modes Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
ID511, Harsh
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
4-20mA (16-bit precision DAC) x 1 
4-20mA (16-bit precision DAC) x 2
I/O (input/output options)  In x 8 / OC Out x 12
 In x 8 / Relay Out x 12
Multiple calibration modes Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
ID511, DIN Rail Mount
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
4-20mA (16-bit precision DAC) x 1
4-20mA (16-bit precision DAC) x 2
I/O (input/output options) In x 8 / OC Out x 12
In x 8 / Relay Out x 12
Multiple calibration modes Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
ID550WL , Panel
6-bit LED display
Supports scale x 1 analog scale input, and each channel supports up to 4 load cells input
Accuracy according to the metrological approval (CPA) 3000e, with a maximum display resolution of 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU
Standard GPS positioning and 2G wireless communication
Tower warehouse weighing applications Material level lower limit alarm
Material feeding and weighing record management
Material discharge weighing record management
Supports storage of 1000 weighing records
Real-time weight and weighing records uploaded to the cloud
Multiple calibration modes Supports 2-point code removal calibration at most
Calibration without weights
Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 8 version)

Products

Application Industries

Contact Us
0086-519-85506673
(0086)18914337708 (Wechat / WhatsApp )
No.3, Building Sino-Europe( Changzhou)
Testing, Inspection and Certification
Cooperation Industrial Park,Tianning
District, Changzhou - 213000, Jiangsu, China
Mr.Chen: sales@webowt.com
Online Message
Copyright  2022 Changzhou Weibo Weighing Equipment System Co.,Ltd. All Rights Reserved.  苏ICP备2021011193号-3  Powered by:www.leadong.com  SEO