PCC & PCS Ultra Low Scale - Changzhou Weibo Weighing Equipment System Co., Ltd.

PCC & PCS Ultra Low Scale

Home » Products » Floor Scales » PCC & PCS Ultra Low Scale

Platform Scales-PCC & PCS Ultra Low Profile

Floor Scales-PCC & PCS

Features:

PCC

Carbon steel structure scale, patterned steel plate table top, surface spray treatment

PCS

All stainless steel sandblasting scale platform
Force transmission mechanism with automatic reset
Ultra-low table top 45mm
Ultra-short ramp 30cm

Inquiry

Configuration Category

< >

PCS Floor Scale

More >>
PCC Floor Scale

More >>

Scale Configuration

Ramp Configuration

Download

Manual

WEBOWT Weighing Scale.pdf

Recommended Products

ID550, Harsh

6-bit LED display
Supports analog scale input x 1, and up to 6 load cells
Supports 60,000 display divisions
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU, PROFINET communication interface board (dual LAN ports, built-in switch, Siemens PLC)
Options:

scale x 1 4-20 mA (16-bit precision DAC)
In x 4 / OC Out x 6
In x 4 / Relay Out x 6

Multiple calibration modes

Supports up to 2-point weight calibration
Calibration without weights
Remote calibration via PLC communication interface
Remote calibration via MODBUS-RTU communication interface

Supports applications

Basic weighing version
Material level weighing
Single-speed/dual-speed preset point fixed value control
Lower/upper limit level detection

Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W

ID260

ID260 general industrial weighing instrument, all stainless steel shell, suitable for a variety of harsh industrial environments, a variety of installation forms to choose from, new OLED display, graphical display, support Chinese and English and other Chinese, rich communication interface, can realize the transmission of transaction data through serial port, USB and Ethernet, and can be connected to the MES system. In addition to basic weighing applications, it also provides a wide range of applications such as truck scale weighing, counting, checkweighing, animal weighing, etc., which are widely used in food, pharmaceutical, chemical, electronics and other industries.
· All stainless steel shell, IP66/IP67 protection level, to meet a variety of harsh industrial application scenarios
· Green OLED display, graphical display, support Chinese and English and other Chinese, large font display
· The keyboard is equipped with independent power on/off, 9 function keys, 4 guide keys and 12 alphanumeric keys, supporting Chinese, English and numeric input
· Analog platform with up to 6 x 150 ohm analog sensors
· It is equipped with COM1-RS232, COM2-RS485, USB interface, optional network port and WiFi component
· I/O: 4 in and 6 out components are optional
· Built-in SD card option
· Power supply: 100-240VAC AC power supply or built-in rechargeable battery
· Mounting bracket: The bracket is optional, and the instrument supports desktop, square tube column installation, round pipe column installation and wall bracket installation
· It supports connecting printers and scanners, and can choose from three label printing modes: normal mode, counting mode, and checkweighing mode

ID226, SS1 Body

6-bit super large LED display with a word height of 33.4mm, available in red or green. Supports CPA 6000e certification accuracy and up to 200,000 display divisions.
Built-in switch power supply, supports wide voltage AC 85-264V power supply.
Built-in charging circuit, can be equipped with a 6V4.0AH lead-acid rechargeable battery.
Standard supports serial ports x 2: COM1 (RS232) + COM2 (RS485).
Standard supports MODBUS-RTU, continuous transmission, command input and output, SICS, and barcode scanner input.
Optional supports for add-ons

Relay output board
Ethernet communication board
Bluetooth communication board
WIFI communication board

Supports basic weighing function, X10 function, simple checkweighing and sorting function, counting function, and animal weighing function.
Supports Chinese printing function, capable of printing simple Chinese labels.
Installation method

304 stainless steel dustproof housing (optional with desktop, round pipe bracket, or square pipe bracket).

ID551PN , Multi Scales Weighing Controller (Metal)

6-bit LED display, can switch to display the weight of 4 scales
Supports 1-4 analog scale input configurations, and supports up to 4 analog scale inputs
Each channel supports up to 8 350-ohm analog load cells;
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Supports single LAN port version and dual LAN ports version selection
Single LAN port version supports: MODBUS-RTU, MODBUS-TCP, TCP, UDP
Dual LAN ports version supports: PROFINET/EtherNet/IP/CC_LINK IE/EtherCAT
Multiple calibration modes

Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
Installation Method

ABS plastic shell standard industrial DIN
Metal housing standard industrial DIN

ID551PN , Single Scale Weighing Controller

7-bit LED display
Supports 1 analog scale input configuration
Single channel supports up to 8 350-ohm analog load cells;
High precision 7500e, ordinary precision 6000e, OIML: 6000e
OIML & CE certification
Supports single LAN port version and dual LAN ports version selection
Serial port: RS232/485, supports MODBUS-RTU
Single LAN port version supports: MODBUS-TCP, TCP, UDP
Dual LAN ports version supports: PROFINET, EtherNet/IP, CC-LINK IE FB, EtherCAT
Multiple calibration modes

Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 4W;
Installation Method

Metal housing standard industrial DIN

FW650 , panel type

7" or "13" LCD color touch screen, supports switching between Chinese and English
Supports scale x 1 analog scale or analog scale x 2 access, supports up to 10 load cells
Accuracy according to the metrological approval (CPA) 6000e, with a maximum display resolution of 150,000
Standard configuration:

4 serial ports
2 LAN ports (built-in switch function)
4 USB interfaces, supports the connection of wireless keyboard, mouse, USB flash disk and scanning gun
32G memory card

Standard supports MODBUS-RTU and MODBUS-TCP
PLC communication interface options:

PROFIBUS-DP (Siemens PLC) · CC-link (Mitsubishi PLC)
Scale x 1 4-20 mA (16-bit precision DAC)
scales x 2 4-20 mA (16-bit precision DAC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)

Wireless communication interface

WIFI Wireless
4G Wireless (Huawei 4G Module)

I/O (input/output options)

In x 4 / OC Out x 6
In x 8 / OC Out x 12

Multiple calibration modes

Supports up to 5-point weight calibration
Calibration without weights
Remote calibration via PLC communication interface

Supports applications

Industry 4.0 intelligent weighing and labeling, MES terminal version
Manual batching version
Automatic batching version
Intelligent shelves management version
Filling version
Material tower weighing IoT version

Three-level authority management
Modify the log
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 20W；
PC management software:

Industrial 4.0 MES version client, weighing data acquisition
Manual batching version client · Material tower weighing client

ID550WL , Panel

6-bit LED display
Supports scale x 1 analog scale input, and each channel supports up to 4 load cells input
Accuracy according to the metrological approval (CPA) 3000e, with a maximum display resolution of 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU
Standard GPS positioning and 2G wireless communication
Tower warehouse weighing applications

Material level lower limit alarm
Material feeding and weighing record management
Material discharge weighing record management
Supports storage of 1000 weighing records
Real-time weight and weighing records uploaded to the cloud

Multiple calibration modes

Supports 2-point code removal calibration at most
Calibration without weights

Working power supply:

DC 24VDC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 8 version)

ID551, DIN

6-bit LED display
Supports scale x 1 analog scale input, and each channel supports up to 4 load cells input
Accuracy according to the metrological approval (CPA) 3000e, with a maximum display resolution of 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU
Standard with In x 8 / OC Out x 8 or In x 8 / OC Out x 12
Applications

Basic weighing application with two-speed setpoint control (In x 8 / Out x 8 version)
Force application (In x 8 / Out x 8 version)
Bagging scale application (In x 8 / Out x 12 versions)

Working power supply:

DC 24VDC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 8 version)
AC 85-264VAC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 12 version)

Installation Method

Standard industrial DIN

ID203 , DIN

6-bit LED display

Supports the access of 1, 2 and 3 analog scales, and each channel supports 4 load cells input at most.
Certification: CPA 3000e, division up to 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU

Multiple calibration modes
Supports up to 2-point weight calibration
Calibration without weights
Remote calibration via MODBUS-RTU communication interface

Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6W;
Installation method

Standard industrial DIN

ID550 , Panel

scale x 1 4-20 mA (16-bit precision DAC)
In x 4 / OC Out x 6
In x 4 / Relay Out x 6

Multiple calibration modes

Supports up to 2-point weight calibration
Calibration without weights
Remote calibration via PLC communication interface
Remote calibration via MODBUS-RTU communication interface

Supports applications

Basic weighing version
Material level weighing
Single-speed/dual-speed preset point fixed value control
Lower/upper limit level detection

Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W

ID510, Panel (High speed weight check)

scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)

Optional I/O (input/output)

In x 8 / OC Out x 12
In x 8 / Relay Out x 12

Multiple calibration modes

Supports up to 5-point code-breaking calibration • calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version/bagging version/checkweighing version/filling version/batching version

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID510, Panel (Special version for filling)

scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)

Optional I/O (input/output)

In x 8 / OC Out x 12
In x 8 / Relay Out x 12

Multiple calibration modes
Supports up to 5-point code-breaking calibration • calibration without weights

Remote calibration through PLC communication interface

Application supports

Basic weighing version/bagging version/checkweighing version/filling version/batching version

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID510, Panel (Batching application)

2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
OIML & CE certificates
Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface
PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC)
scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
Optional I/O (input/output)

In x 8 / OC Out x 12
In x 8 / Relay Out x 12

Multiple calibration modes

Supports up to 5-point code-breaking calibration • calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version/bagging version/checkweighing version/filling version/batching version

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID510, Panel (Bagging Version)

scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)

Optional I/O (input/output)

In x 8 / OC Out x 12
In x 8 / Relay Out x 12

Multiple calibration modes

Supports up to 5-point code-breaking calibration • calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version/bagging version/checkweighing version/filling version/batching version

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID510, Panel (Basic Version)

scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)

Optional I/O (input/output)

In x 8 / OC Out x 12
In x 8 / Relay Out x 12

Multiple calibration modes

Supports up to 5-point code-breaking calibration • calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version/bagging version/checkweighing version/filling version/batching version

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID510, Harsh (Basic Version)

scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)

Optional I/O (input/output)

In x 8 / OC Out x 12
In x 8 / Relay Out x 12

Multiple calibration modes

Supports up to 5-point code-breaking calibration • calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version/bagging version/checkweighing version/filling version/batching version

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID511CKW DIN

7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface

PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
Scale x 1 4-20mA (16-bit precision DAC)
Scales x 2 4-20mA (16-bit precision DAC)

I/O (input/output options)
In x 8 / OC Out x 12
In x 8 / Relay Out x 12
Multiple calibration modes

Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID511CKW

PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
Scale x 1 4-20mA (16-bit precision DAC)
Scales x 2 4-20mA (16-bit precision DAC)

I/O (input/output options)
In x 8 / OC Out x 12
In x 8 / Relay Out x 12
Multiple calibration modes

Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

ID511Pro , Panel

7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface

PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)

Optional I/O (input/output)

In x 4 / MOS Out x 6.

Multiple calibration modes

Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material

Application supports

Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W

ID511, Harsh

PROFIBUS-DP (Siemens PLC)
PROFINET (dual LAN ports, built-in switch, Siemens PLC)
EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
CC-Link (Mitsubishi PLC)
4-20mA (16-bit precision DAC) x 1
4-20mA (16-bit precision DAC) x 2

I/O (input/output options)

In x 8 / OC Out x 12
In x 8 / Relay Out x 12

Multiple calibration modes

Supports up to 5-point calibration
Calibration without weights
Remote calibration through PLC communication interface

Application supports

Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection

The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

Online Message

Call Us：

Platform Scales-PCC & PCS Ultra Low Profile

Manual

Products

Application Industries