Call Us：

(0086)18914337708
ID510
Home » Products » Controllers & Indicators » ID510

Products

ID510-Panel

19 WEBOWT ID510 PANEL PROFINET
7 WEBOWT ID510 HARSH 4-20mA-2CH
ID510 Process Controller
  1. The standard configuration supports MODBUS-RTU, MODBUS-TC (only network port version)
  2. PLC communication interface options
  3. PROFIBUS-DP(Siemens PLC) ·CC-LINK(Mitsubishi PLC)
  4. 1 channel 4-20mA(16 bit precision DAC) · 2 channel 4-20mA(16 bit precision DAC)
  5. PROFINET(dual network port ,built in switch ,Siemens PLC)
  6. EtherNet/IP(dual network port ,built in switch ,Rockwell PLC ,Delta PLC)
  7. I/O(I/O option): 8 inputs and 12 transistor outputs / 8 inputs and 12 relay outputs
Configuration Category
Configuration
ID510 CONFIGURATION
Drawing
ID510 Drawing and Installation
Configuration Category

  • ID510 Panel (Click down arrow ∨ to see corresponding configurations)

    • ID510, Panel (Basic Version)
      ID510, Panel (Basic Version)
      Brief:
      2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
      Supports 1 analog scale input, with a maximum of 12 load cells
      Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
      OIML & CE certificates
      Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
      Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
      Optional PLC communication interface
      PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC) scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
      PROFINET (dual LAN ports, built-in switch, Siemens PLC)
      EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
      Optional I/O (input/output) In x 8 / OC Out x 12
      In x 8 / Relay Out x 12
      Multiple calibration modes Supports up to 5-point code-breaking calibration • calibration without weights
      Remote calibration through PLC communication interface
      Application supports Basic weighing version/bagging version/checkweighing version/filling version/batching version
      The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
    • ID510, Panel (Bagging Version)
      ID510, Panel (Bagging Version)
      Brief:
      2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
      Supports 1 analog scale input, with a maximum of 12 load cells
      Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
      OIML & CE certificates
      Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
      Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
      Optional PLC communication interface
      PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC) scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
      PROFINET (dual LAN ports, built-in switch, Siemens PLC)
      EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
      Optional I/O (input/output) In x 8 / OC Out x 12
      In x 8 / Relay Out x 12
      Multiple calibration modes Supports up to 5-point code-breaking calibration • calibration without weights
      Remote calibration through PLC communication interface
      Application supports Basic weighing version/bagging version/checkweighing version/filling version/batching version
      The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
    • ID510, Panel (Special version for filling)
      ID510, Panel (Special version for filling)
      Brief:
      2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
      Supports 1 analog scale input, with a maximum of 12 load cells
      Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
      OIML & CE certificates
      Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
      Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
      Optional PLC communication interface
      PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC) scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
      PROFINET (dual LAN ports, built-in switch, Siemens PLC)
      EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
      Optional I/O (input/output) In x 8 / OC Out x 12
      In x 8 / Relay Out x 12
      Multiple calibration modes
      Supports up to 5-point code-breaking calibration • calibration without weights Remote calibration through PLC communication interface
      Application supports Basic weighing version/bagging version/checkweighing version/filling version/batching version
      The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
    • ID510, Panel (High speed weight check)
      ID510, Panel (High speed weight check)
      Brief:
      2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
      Supports 1 analog scale input, with a maximum of 12 load cells
      Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
      OIML & CE certificates
      Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
      Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
      Optional PLC communication interface
      PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC) scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
      PROFINET (dual LAN ports, built-in switch, Siemens PLC)
      EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
      Optional I/O (input/output) In x 8 / OC Out x 12
      In x 8 / Relay Out x 12
      Multiple calibration modes Supports up to 5-point code-breaking calibration • calibration without weights
      Remote calibration through PLC communication interface
      Application supports Basic weighing version/bagging version/checkweighing version/filling version/batching version
      The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
    • ID510, Panel (Batching application)
      ID510, Panel (Batching application)
      Brief:
      2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
      Supports 1 analog scale input, with a maximum of 12 load cells
      Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
      OIML & CE certificates
      Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
      Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
      Optional PLC communication interface
      PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC)
      scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
      PROFINET (dual LAN ports, built-in switch, Siemens PLC)
      EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
      Optional I/O (input/output) In x 8 / OC Out x 12
      In x 8 / Relay Out x 12
      Multiple calibration modes Supports up to 5-point code-breaking calibration • calibration without weights
      Remote calibration through PLC communication interface
      Application supports Basic weighing version/bagging version/checkweighing version/filling version/batching version
      The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;

  • ID510 Harsh (Click down arrow ∨ to see corresponding configurations)

    • ID510, Harsh (Basic Version)
      ID510, Harsh (Basic Version)
      Brief:
      2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
      Supports 1 analog scale input, with a maximum of 12 load cells
      Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
      OIML & CE certificates
      Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
      Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
      Optional PLC communication interface
      PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC) scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
      PROFINET (dual LAN ports, built-in switch, Siemens PLC)
      EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
      Optional I/O (input/output) In x 8 / OC Out x 12
      In x 8 / Relay Out x 12
      Multiple calibration modes Supports up to 5-point code-breaking calibration • calibration without weights
      Remote calibration through PLC communication interface
      Application supports Basic weighing version/bagging version/checkweighing version/filling version/batching version
      The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
Download

Manual

  • ID510_Technical_Manual_Basic_App_R2.0_20220825.pdf

Technical Specification

  • ID510_Technical_Manual_Basic_App_R2.0_20220825.pdf

Certificates

  • OIML-Certificate-R76_2006-A-DK2-2022.07-ID510 ID511 ID551PN.pdf

Typical Application
Recommended Products
ID511Pro , Panel
ID511Pro , Panel
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
  • EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
  • CC-link IE FB (Mitsubishi PLC)
  • EtherCAT (HIAS PLC)
Optional I/O (input/output)
  • In x 4 / MOS Out x 6.
Multiple calibration modes
  • Supports up to 5-point weight calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
  • Calibration with material
Application supports
  • Basic weighing version
  • Supports dual-speed preset point control and 8 simple comparison outputs
  • Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
0
0
ID511Pro , DIN Rail
ID511Pro , DIN Rail
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
  • EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
  • CC-link IE FB (Mitsubishi PLC)
  • EtherCAT (HIAS PLC)
Optional I/O (input/output)
In x 4 / MOS Out x 6.
Multiple calibration modes
  • Supports up to 5-point weight calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
  • Calibration with material
Application supports
  • Basic weighing version
  • Supports dual-speed preset point control and 8 simple comparison outputs
  • Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
0
0
ID511Pro , Harsh
ID511Pro , Harsh
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
  • EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
  • CC-link IE FB (Mitsubishi PLC)
  • EtherCAT (HIAS PLC)
Optional I/O (input/output)
  • In x 4 / MOS Out x 6.
Multiple calibration modes
  • Supports up to 5-point weight calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
  • Calibration with material
Application supports
  • Basic weighing version
  • Supports dual-speed preset point control and 8 simple comparison outputs
  • Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
0
0
ID511CKW
ID511CKW
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface
  • PROFIBUS-DP (Siemens PLC)
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC)
  • EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
  • CC-Link (Mitsubishi PLC)
  • Scale x 1 4-20mA (16-bit precision DAC)
  • Scales x 2 4-20mA (16-bit precision DAC)
I/O (input/output options)
 In x 8 / OC Out x 12
 In x 8 / Relay Out x 12
Multiple calibration modes
  • Supports up to 5-point calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
Application supports
  • Basic weighing version
  • Supports dual-speed preset point control and 8 simple comparison outputs
  • Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
0
0
ID511, Panel
ID511, Panel
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface
  • PROFIBUS-DP (Siemens PLC)
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC)
  • EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
  • CC-Link (Mitsubishi PLC)
  • 4-20mA (16-bit precision DAC) x 1
  • 4-20mA (16-bit precision DAC) x 2
I/O (input/output options)
 In x 8 / OC Out x 12
 In x 8 / Relay Out x 12
Multiple calibration modes
  • Supports up to 5-point calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
Application supports
  • Basic weighing version
  • Supports dual-speed preset point control and 8 simple comparison outputs
  • Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
0
0
ID511, Harsh
ID511, Harsh
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface
  • PROFIBUS-DP (Siemens PLC)
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC)
  • EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
  • CC-Link (Mitsubishi PLC)
  • 4-20mA (16-bit precision DAC) x 1 
  • 4-20mA (16-bit precision DAC) x 2
I/O (input/output options)
  •  In x 8 / OC Out x 12
  •  In x 8 / Relay Out x 12
Multiple calibration modes
  • Supports up to 5-point calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
Application supports
  • Basic weighing version
  • Supports dual-speed preset point control and 8 simple comparison outputs
  • Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
0
0
ID511, DIN Rail Mount
ID511, DIN Rail Mount
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Standard with serial ports x 2 RS232+RS232/485 or serial ports x 2 RS232+RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface
  • PROFIBUS-DP (Siemens PLC)
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC)
  • EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
  • CC-Link (Mitsubishi PLC)
  • 4-20mA (16-bit precision DAC) x 1
  • 4-20mA (16-bit precision DAC) x 2
I/O (input/output options)
  • In x 8 / OC Out x 12
  • In x 8 / Relay Out x 12
Multiple calibration modes
  • Supports up to 5-point calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
Application supports
  • Basic weighing version
  • Supports dual-speed preset point control and 8 simple comparison outputs
  • Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
0
0
ID550WL , Panel
ID550WL , Panel
6-bit LED display
Supports scale x 1 analog scale input, and each channel supports up to 4 load cells input
Accuracy according to the metrological approval (CPA) 3000e, with a maximum display resolution of 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU
Standard GPS positioning and 2G wireless communication
Tower warehouse weighing applications
  • Material level lower limit alarm
  • Material feeding and weighing record management
  • Material discharge weighing record management
  • Supports storage of 1000 weighing records
  • Real-time weight and weighing records uploaded to the cloud
Multiple calibration modes
  • Supports 2-point code removal calibration at most
  • Calibration without weights
Working power supply:
  • DC 24VDC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 8 version)
0
0
FW650 , Harsh
FW650 , Harsh
7" or "13" LCD color touch screen, supports switching between Chinese and English
Supports scale x 1 analog scale or analog scale x 2 access, supports up to 10 load cells
Accuracy according to the metrological approval (CPA) 6000e, with a maximum display resolution of 150,000
Standard configuration:
  • 4 serial ports
  • 2 LAN ports (built-in switch function)
  • 4 USB interfaces, supports the connection of wireless keyboard, mouse, USB flash disk and scanning gun
  • 32G memory card
Standard supports MODBUS-RTU and MODBUS-TCP
PLC communication interface options:
  • PROFIBUS-DP (Siemens PLC) · CC-link (Mitsubishi PLC)
  • Scale x 1 4-20 mA (16-bit precision DAC)
  • scales x 2 4-20 mA (16-bit precision DAC)
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC)
  • EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
Wireless communication interface
  • WIFI Wireless
  • 4G Wireless (Huawei 4G Module)
I/O (input/output options)
  • In x 4 / OC Out x 6
  • In x 8 / OC Out x 12
Multiple calibration modes
  • Supports up to 5-point weight calibration
  • Calibration without weights
  • Remote calibration via PLC communication interface
Supports applications
  • Industry 4.0 intelligent weighing and labeling, MES terminal version
  • Manual batching version
  • Automatic batching version
  • Intelligent shelves management version
  • Filling version
  • Material tower weighing IoT version
Three-level authority management
Modify the log
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 20W；
PC management software:
  • Industrial 4.0 MES version client, weighing data acquisition
  • Manual batching version client · Material tower weighing client
0
0
ID203 , DIN
ID203 , DIN
6-bit LED display
Supports the access of 1, 2 and 3 analog scales, and each channel supports 4 load cells input at most.
Certification: CPA 3000e, division up to 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU
  • Multiple calibration modes
  • Supports up to 2-point weight calibration
  • Calibration without weights
  • Remote calibration via MODBUS-RTU communication interface
Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6W;
Installation method
  • Standard industrial DIN
 
0
0
ID226, SS1 Body
ID226, SS1 Body
6-bit super large LED display with a word height of 33.4mm, available in red or green. Supports CPA 6000e certification accuracy and up to 200,000 display divisions.
Built-in switch power supply, supports wide voltage AC 85-264V power supply.
Built-in charging circuit, can be equipped with a 6V4.0AH lead-acid rechargeable battery.
Standard supports serial ports x 2: COM1 (RS232) + COM2 (RS485).
Standard supports MODBUS-RTU, continuous transmission, command input and output, SICS, and barcode scanner input.
Optional supports for add-ons
  • Relay output board
  • Ethernet communication board
  • Bluetooth communication board
  • WIFI communication board
Supports basic weighing function, X10 function, simple checkweighing and sorting function, counting function, and animal weighing function.
Supports Chinese printing function, capable of printing simple Chinese labels.
Installation method
  • 304 stainless steel dustproof housing (optional with desktop, round pipe bracket, or square pipe bracket).
0
0
ID226 , SS2 Body
ID226 , SS2 Body
6-bit super large LED display with a word height of 33.4mm, available in red or green. Supports CPA 6000e certification accuracy and up to 200,000 display divisions.
Built-in switch power supply, supports wide voltage AC 85-264V power supply.
Built-in charging circuit, can be equipped with a 6V4.0AH lead-acid rechargeable battery.
Standard supports serial ports x 2: COM1 (RS232) + COM2 (RS485).
Standard supports MODBUS-RTU, continuous transmission, command input and output, SICS, and barcode scanner input.
Optional supports for add-ons
  • Relay output board
  • Ethernet communication board
  • Bluetooth communication board
  • WIFI communication board
Supports basic weighing function, X10 function, simple checkweighing and sorting function, counting function, and animal weighing function.
Supports Chinese printing function, capable of printing simple Chinese labels.
Installation method
  • 304 stainless steel dustproof housing (optional with desktop, round pipe bracket, or square pipe bracket).
0
0
ID226, SLIM
ID226, SLIM
6-bit super large LED display with a word height of 33.4mm, available in red or green. Supports CPA 6000e certification accuracy and up to 200,000 display divisions.
Built-in switch power supply, supports wide voltage AC 85-264V power supply.
Built-in charging circuit, can be equipped with a 6V4.0AH lead-acid rechargeable battery.
Standard supports serial ports x 2: COM1 (RS232) + COM2 (RS485).
Standard supports MODBUS-RTU, continuous transmission, command input and output, SICS, and barcode scanner input.
Optional supports for add-ons
  • Relay output board
  • Ethernet communication board
  • Bluetooth communication board
  • WIFI communication board
Supports basic weighing function, X10 function, simple checkweighing and sorting function, counting function, and animal weighing function.
Supports Chinese printing function, capable of printing simple Chinese labels.
Installation method
  • 304 stainless steel dustproof housing (optional with desktop, round pipe bracket, or square pipe bracket).
0
0
ID550 , Panel
ID550 , Panel
6-bit LED display
Supports analog scale input x 1, and up to 6 load cells
Supports 60,000 display divisions
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU, PROFINET communication interface board (dual LAN ports, built-in switch, Siemens PLC)
Options:
  • scale x 1 4-20 mA (16-bit precision DAC)
  • In x 4 / OC Out x 6
  • In x 4 / Relay Out x 6
Multiple calibration modes
  • Supports up to 2-point weight calibration
  • Calibration without weights
  • Remote calibration via PLC communication interface
  • Remote calibration via MODBUS-RTU communication interface
Supports applications
  • Basic weighing version
  • Material level weighing
  • Single-speed/dual-speed preset point fixed value control
  • Lower/upper limit level detection
Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W
0
0
ID550, Harsh
ID550, Harsh
6-bit LED display
Supports analog scale input x 1, and up to 6 load cells
Supports 60,000 display divisions
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU, PROFINET communication interface board (dual LAN ports, built-in switch, Siemens PLC)
Options:
  • scale x 1 4-20 mA (16-bit precision DAC)
  • In x 4 / OC Out x 6
  • In x 4 / Relay Out x 6
Multiple calibration modes
  • Supports up to 2-point weight calibration
  • Calibration without weights
  • Remote calibration via PLC communication interface
  • Remote calibration via MODBUS-RTU communication interface
Supports applications
  • Basic weighing version
  • Material level weighing
  • Single-speed/dual-speed preset point fixed value control
  • Lower/upper limit level detection
Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W
0
0
ID551, DIN
ID551, DIN
6-bit LED display
Supports scale x 1 analog scale input, and each channel supports up to 4 load cells input
Accuracy according to the metrological approval (CPA) 3000e, with a maximum display resolution of 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU
Standard with In x 8 / OC Out x 8 or In x 8 / OC Out x 12
Applications
  • Basic weighing application with two-speed setpoint control (In x 8 / Out x 8 version)
  • Force application (In x 8 / Out x 8 version)
  • Bagging scale application (In x 8 / Out x 12 versions)
Working power supply:
  • DC 24VDC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 8 version)
  • AC 85-264VAC, the maximum power consumption of the complete machine is less than 6 W (In x 8 / Out x 12 version)
Installation Method
  • Standard industrial DIN
0
0
ID551PN , Single Scale Weighing Controller
ID551PN , Single Scale Weighing Controller
7-bit LED display
Supports 1 analog scale input configuration
Single channel supports up to 8 350-ohm analog load cells;
High precision 7500e, ordinary precision 6000e, OIML: 6000e
OIML & CE certification
Supports single LAN port version and dual LAN ports version selection
Serial port: RS232/485, supports MODBUS-RTU
Single LAN port version supports: MODBUS-TCP, TCP, UDP
Dual LAN ports version supports: PROFINET, EtherNet/IP, CC-LINK IE FB, EtherCAT
Multiple calibration modes
  • Supports up to 5-point weight calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
  • Calibration with material
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 4W;
Installation Method
  • Metal housing standard industrial DIN
0
0
ID551PN , Multi Scales Weighing Controller (ABS)
ID551PN , Multi Scales Weighing Controller (ABS)
6-bit LED display, can switch to display the weight of 4 scales
Supports 1-4 analog scale input configurations, and supports up to 4 analog scale inputs
Each channel supports up to 8 350-ohm analog load cells;
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Supports single LAN port version and dual LAN ports version selection
Single LAN port version supports: MODBUS-RTU, MODBUS-TCP, TCP, UDP
Dual LAN ports version supports: PROFINET/EtherNet/IP/CC_LINK IE/EtherCAT
Multiple calibration modes
  • Supports up to 5-point calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
Installation Method
  • ABS plastic shell standard industrial DIN
  • Metal housing standard industrial DIN
0
0
ID551PN , Multi Scales Weighing Controller (Metal)
ID551PN , Multi Scales Weighing Controller (Metal)
6-bit LED display, can switch to display the weight of 4 scales
Supports 1-4 analog scale input configurations, and supports up to 4 analog scale inputs
Each channel supports up to 8 350-ohm analog load cells;
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
Have got OIML & CE certificates
Supports single LAN port version and dual LAN ports version selection
Single LAN port version supports: MODBUS-RTU, MODBUS-TCP, TCP, UDP
Dual LAN ports version supports: PROFINET/EtherNet/IP/CC_LINK IE/EtherCAT
Multiple calibration modes
  • Supports up to 5-point calibration
  • Calibration without weights
  • Remote calibration through PLC communication interface
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
Installation Method
  • ABS plastic shell standard industrial DIN
  • Metal housing standard industrial DIN
0
0
ID510, Panel (Basic Version)
ID510, Panel (Basic Version)
2.7-inch OLED dot matrix graphic display, supports switching between Chinese and English
Supports 1 analog scale input, with a maximum of 12 load cells
Metrological approval (CPA) 6000e certified accuracy, OIML: 6000e.
OIML & CE certificates
Standard serial ports x 2 RS232 + RS232/485, or serial ports x 2 RS232 + RS485 with one LAN port
Standard supports MODBUS-RTU, MODBUS-TCP (only supported by the ethernet version)
Optional PLC communication interface
PROFIBUS-DP (Siemens PLC) • CC-Tink (Mitsubishi PLC)
  • scale x 1 4-20mA (16-bit precision DAC) • scales x 2 4-20mA (16-bit precision DAC)
  • PROFINET (dual LAN ports, built-in switch, Siemens PLC)
  • EtherNet/IP (dual LAN ports, built-in switch, Rockwell PLC, Delta PLC)
Optional I/O (input/output)
  • In x 8 / OC Out x 12
  • In x 8 / Relay Out x 12
Multiple calibration modes
  • Supports up to 5-point code-breaking calibration • calibration without weights
  • Remote calibration through PLC communication interface
Application supports
  • Basic weighing version/bagging version/checkweighing version/filling version/batching version
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W;
0
0
Online Message

Products

Application Industries

Contact Us
0086-519-85506673
(0086)18914337708 (Wechat / WhatsApp )
No.3, Building Sino-Europe（ Changzhou）
Testing, Inspection and Certification
Cooperation Industrial Park,Tianning
District, Changzhou - 213000, Jiangsu, China
Mr.Chen: sales@webowt.com
Online Message
Copyright  2022 Changzhou Weibo Weighing Equipment System Co.,Ltd. All Rights Reserved.  苏ICP备2021011193号-3  Powered by:www.leadong.com  SEO