Call Us:

(0086)18914337708
Products
Controllers & Indicators
Explosion-proof Controllers
Load Cell
Weighing Module
Bench Scales
Floor Scales
Intelligent Weighing System
Customized Solutions
Accessories
Products
SELECTED PRODUCT LINES:
ID511Pro , Panel
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output) In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID511Pro , Harsh
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output) In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID511Pro , DIN Rail
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output)
In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID226 , SS2 Body
6-bit super large LED display with a word height of 33.4mm, available in red or green. Supports CPA 6000e certification accuracy and up to 200,000 display divisions.
Built-in switch power supply, supports wide voltage AC 85-264V power supply.
Built-in charging circuit, can be equipped with a 6V4.0AH lead-acid rechargeable battery.
Standard supports serial ports x 2: COM1 (RS232) + COM2 (RS485).
Standard supports MODBUS-RTU, continuous transmission, command input and output, SICS, and barcode scanner input.
Optional supports for add-ons Relay output board
Ethernet communication board
Bluetooth communication board
WIFI communication board
Supports basic weighing function, X10 function, simple checkweighing and sorting function, counting function, and animal weighing function.
Supports Chinese printing function, capable of printing simple Chinese labels.
Installation method 304 stainless steel dustproof housing (optional with desktop, round pipe bracket, or square pipe bracket).

Products

Application Industries

Contact Us
0086-519-85506673
(0086)18914337708 (Wechat / WhatsApp )
No.3, Building Sino-Europe( Changzhou)
Testing, Inspection and Certification
Cooperation Industrial Park,Tianning
District, Changzhou - 213000, Jiangsu, China
Mr.Chen: sales@webowt.com
Online Message
Copyright  2022 Changzhou Weibo Weighing Equipment System Co.,Ltd. All Rights Reserved.  苏ICP备2021011193号-3  Powered by:www.leadong.com  SEO