Call Us:

(0086)18914337708
Products
Controllers & Indicators
Explosion-proof Controllers
Load Cell
Weighing Module
Bench Scales
Floor Scales
Intelligent Weighing System
Customized Solutions
Accessories
Products
SELECTED PRODUCT LINES:
ID511Pro , Panel
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output) In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID511Pro , Harsh
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output) In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID511Pro , DIN Rail
7-bit LED display
Supports 1 analog scale input, with a maximum of 12 load cells
Certification: CPA 6000e, division up to 150,000
Standard with serial port x 1 (RS232/485), 2 LAN ports, and 1 high precision weighing AD
Standard supports for MODBUS-RTU and MODBUS-TCP (for single LAN port version only)
Optional PLC communication interface PROFINET (dual LAN ports, built-in switch, Siemens PLC), certified by siemens PN consistency test
EtherNet/IP (dual LAN ports, built-in switch, rockwell PLC, Delta PLC)
CC-link IE FB (Mitsubishi PLC)
EtherCAT (HIAS PLC)
Optional I/O (input/output)
In x 4 / MOS Out x 6.
Multiple calibration modes Supports up to 5-point weight calibration
Calibration without weights
Remote calibration through PLC communication interface
Calibration with material
Application supports Basic weighing version
Supports dual-speed preset point control and 8 simple comparison outputs
Lower/upper limit material level detection
The working power supports AC 85-264VAC or DC 24VDC, and the maximum power consumption of the complete machine is less than 6W
ID550 , Panel
6-bit LED display
Supports analog scale input x 1, and up to 6 load cells
Supports 60,000 display divisions
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU, PROFINET communication interface board (dual LAN ports, built-in switch, Siemens PLC)
Options: scale x 1 4-20 mA (16-bit precision DAC)
In x 4 / OC Out x 6
In x 4 / Relay Out x 6
Multiple calibration modes Supports up to 2-point weight calibration
Calibration without weights
Remote calibration via PLC communication interface
Remote calibration via MODBUS-RTU communication interface
Supports applications Basic weighing version
Material level weighing
Single-speed/dual-speed preset point fixed value control
Lower/upper limit level detection
Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6 W
ID203 , DIN
6-bit LED display
Supports the access of 1, 2 and 3 analog scales, and each channel supports 4 load cells input at most.
Certification: CPA 3000e, division up to 60,000
Standard with serial port x 1 RS232/485
Standard supports MODBUS-RTU Multiple calibration modes
Supports up to 2-point weight calibration
Calibration without weights
Remote calibration via MODBUS-RTU communication interface
Working power supply: DC 24VDC, the maximum power consumption of the complete machine is less than 6W;
Installation method Standard industrial DIN
 

Products

Application Industries

Contact Us
0086-519-85506673
(0086)18914337708 (Wechat / WhatsApp )
No.3, Building Sino-Europe( Changzhou)
Testing, Inspection and Certification
Cooperation Industrial Park,Tianning
District, Changzhou - 213000, Jiangsu, China
Mr.Chen: sales@webowt.com
Online Message
Copyright  2022 Changzhou Weibo Weighing Equipment System Co.,Ltd. All Rights Reserved.  苏ICP备2021011193号-3  Powered by:www.leadong.com  SEO